Camera Specifications

• CCD Sensor: 1/4" Interline Transfer CCD
• Zoom Magnification: x10 Optical Zoom, x10 Digital Zoom (Max x100 Zoom)
• Day & Night Function
• Various Focus Mode: Auto-Focus / Manual Focus / Semi-Auto Focus
• Independent & Simultaneous Camera Characteristic Setup in Preset operation

Powerful Pan/Tilt Function

• Max 360°/sec high speed Pan/Tilt Motion
• Using Vector Drive Technology, Pan/Tilt motions are accomplished in a shortest path. As a result, time to target view is reduced dramatically and the video on the monitor is very natural to watch.
• For jog operation using a controller, since ultra slow speed 0.05°/sec can be reached, it is very easy to locate camera to desired target view. Additionally, it is east to move camera to a desired position with zoom-proportional pan/tilt movement.

Preset, Pattern, Scan, Group, Privacy Mask, Schedule and More…

• Max. 127 Presets are assignable and characteristics of each preset can be set up independently, such as White Balance, Auto Exposure, Label and so on.
• Max. 8 set of Scan action can be stored. This enables to move camera repetitively between two preset positions with designated speed.
• Max. 4 of Patterns can be recorded and played back. This enables to move camera to follow any trajectory operated by joystick as closely as possible.
• Max. 8 set of Group action can be stored. This enables to move camera repetitively with combination of Preset or Pattern or Scan. A Group is composed of max. 20 entities of Preset / Pattern / Scans.
• Privacy Masks are assignable, not to intrude on other’s privacy. (4 Privacy Zones)
• 7 rules of Schedule can be assigned by day and time. Appropriate actions (such as Home, Preset, Group, Pattern, Scan) can be defined for each rule. Also, it is possible to make rule by Weekday and weekend to simplify the rule.

PTZ (Pan/Tile/Zoom) Control

• With RS-485 communication, max. 255 of cameras can be controlled at the same time.
• Pelco-D or Pelco-P protocol can be selected as a control protocol in the current version of firmware.

OSD(On Screen Display) Menu

• OSD menu is provided to display the status of camera and to configure the functions interactively.
• The information such as Camera ID, Pan/Tilt/Zoom/Direction, Alarm Input & Output, date/time, current temperature and Preset can be displayed on screen.
• Each display item can be turned on or off independently.

Alarm I/O Fucntions

• 2 alarm sensor Inputs and 1 relay output are available.
• To reject external electric noise and shock perfectly, alarm sensor input is decoupled with photo coupler.
• The signal range of sensor input is from DC 5.0 to 12.0 volts to adopt various applications.
• If an external sensor is activated, camera can be set to move to the corresponding Preset position.
• Relay output can be assigned to work with a certain preset.

Reserved Presets for Special Purpose

Most camera characteristics can be set up easily and directly with reserved preset, not entering into OSD menu. For more information, refer to “Reserved Preset” in this manual and “Direct Key Command” Manual.

Power up Action

This function enables to resume the last action executed before power down. Most of actions such as Preset, Pattern, Scan and Group are available for this function but Jog actions are not available to resume.

Auto Flip

In case that tilt angle arrives at the top of tilt orbit (90°), zoom module camera keep moving to opposite tilt direction (180°) to keep tracing targets. As soon as zoom module camera passes though the top of tilt direction (90°), images should be reversed automatically and F appears in screen. If this function is set to OFF, tilt movement range is 0~95°

Parking Action

This function enables to locate the camera to specific position automatically if operator doesn’t operate the controller for a while. The Park Time can be defined as an interval from 1 minute to 4 hours.

Alarm Input

2 Alarm Inputs are used. If an external sensor is activated, camera can be set to move to corresponding preset position. It is noted that the latest alarm input is effective if multiple sensors are activated.

Privacy Zone Mask

To protect privacy, MAX. 4 Privacy Masks can be created on the arbitrary position to hide objects such windows, shops or private house. With Spherical Coordinates system, powerful Privacy Zone Mask function is possible.

General/Special Image Setup

WB(White Balance) and AE (Auto Exposure) can be set up independently for each preset. There are 2 modes, “General” mode & “Special” Mode. The General mode means that WB or AE can be set up totally and simultaneously for all presets in “ZOOM CAMERA SETUP” menu. The Special mode means that WB or AE can be set up independently or separately for each preset in each preset setup menu. Each Special WB/AE value should activate correspondingly when camera arrives at each preset location. During jog operation, General WB/AE value should be applied. All Special WB/AE value will not be changed although General WB/AE value change.

Semi Auto Focus

This mode exchanges focus mode automatically between Manual Focus mode and Auto Focus mode by operation. Manual Focus mode activates in preset operation and Auto Focus mode activates during jog operation. With Manual mode at presets, Focus data is memorized in each preset in advance and camera calls focus data in correspondence with presets as soon as camera arrives at a preset. It should shorten time to get focuses. Focus mode changes to Auto Focus mode automatically when jog operation stats.

SPECIFICATIONS