• Product categories

  • Sub Categories

Holemaking

Showing 1–20 of 32 results

Optimized teeth pattern for fast, consistent cutting of steel including stainless • Kit contains the three most frequently used small hole saws: 7/8 inch, 1-1/8 inch, and 1-3/8 inch (22, 29, and 35 mm), arbor, arbor adapter, spare pilot bit and hex key • Bore through wood 2x4s in a single pass • Cuts precise holes in both mild and stainless steel, drywall, ceiling tile, laminates, wood and plastic • Multiple leverage points for easy slug removal • Includes a rugged carrying case • NOTE: Set pilot drill point 1/8 inch beyond tooth points
Two flutes cut faster and keep bit cooler. • Fast-starting, non-walking drill tip. • High-visibility silver targets for primary hole sizes. • Thick 3/8" hex shank won't round out in the drill chuck for a more positive grip. • 9 hole sizes.
Connects to the end of a flex bit and extends the length. • For use with flex bits 9/16" (14 mm) and smaller. • Connection diameter is 7/16" (11 mm).
Used to drill holes through wood within a wall. • Tapered back for easy bit retrieval. • Spring steel shaft resists deformation. • Screw point tip pulls the bit through wood. • Hole in tip allows for use with wire or cable pulling grip. • Comes with a reusable protective case for the auger head when the bit is not in use.

Flex Bit Auger 3/8″ x 54″

No rating
TO-K53716
Used to drill holes through wood within a wall. • Tapered back for easy bit retrieval. • Spring steel shaft resists deformation. • Screw point tip pulls the bit through wood. • Hole in tip allows for use with wire or cable pulling grip. • Comes with a reusable protective case for the auger head when the bit is not in use.
Optimized for cutting steel including stainless steel. • Cuts precise holes in drywall, ceiling tile steel, wood, plastic and stainless steel. • Longest lasting, fastest cutting blade on the market. • Multiple slots provide different leverage points to easily remove slugs. • Heavy-duty steel construction includes 5 mil back plate to withstand abuse. • Hex-shaped base for easy removal from arbor. • Use with Klein Tools Arbor (Cat. No. 31906). Sold separately.
Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16" (5 mm) thick. • Split point pilot drill bit prevents bit walking. • Integrated flange prevents the operator from drilling beyond the sheet metal.

4-Piece Carbide Hole Cutter Set

No rating
TO-K31872
Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16" (5 mm) thick • Split point pilot drill bit prevents bit walking • Set contains: 7/8", 1-1/8", 1-3/8" plus one extra pilot bit • Integrated flange prevents the operator from drilling beyond the sheet metal. • Conduit and pipe sizes: 1/2" (13 mm)-1" (25 mm)
Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16" (5 mm) thick. • Split point pilot drill bit prevents bit walking. • Integrated flange prevents the operator from drilling beyond the sheet metal. • Conduit and pipe sizes: 1" (25 mm). • Uses replacement pilot bit 31874.
Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16" (5 mm) thick. • Split point pilot drill bit prevents bit walking. • Integrated flange prevents the operator from drilling beyond the sheet metal. • Conduit and pipe sizes: 3/4" (19 mm). • Uses replacement pilot bit 31874.
Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16" (5 mm) thick. • Split point pilot drill bit prevents bit walking. • Integrated flange prevents the operator from drilling beyond the sheet metal. • Conduit and pipe sizes: 1/2" (13 mm
Replacement shaft for 7/8", 1-1/8"and 1-3/8" (22 mm, 29 mm and 35 mm) bits • Drill head not included • Works in both 3/8" and 1/2" drills • Hardened steel for long life.
Unique cutting head design allows you to customize the hole shape. • Unique head shape minimizes vibration when drilling versus ordinary paddle bits. • Easy-to-sharpen cutting blades. • Easy-to-replace hardened pilot screw for extra durability. • Works in both 3/8" and 1/2" drills.
Unique cutting head design allows you to customize the hole shape. • Unique head shape minimizes vibration when drilling versus ordinary paddle bits. • Easy-to-sharpen cutting blades. • Easy-to-replace hardened pilot screw for extra durability. • Works in both 3/8" and 1/2" drills.
Unique cutting head design allows you to customize the hole shape. • Unique head shape minimizes vibration when drilling versus ordinary paddle bits. • Easy-to-sharpen cutting blades. • Easy-to-replace hardened pilot screw for extra durability. • Works in both 3/8" and 1/2" drills.
Two flutes cut faster and keep bit cooler. • Fast-starting, non-walking drill tip. • High-visibility silver targets for primary hole sizes. • Thick 3/8" hex shank won’t round out in the drill chuck for a more positive grip. • Two hole sizes.
Two flutes cut faster and keep bit cooler. • Fast-starting, non-walking drill tip. • High-visibility silver targets for primary hole sizes. • Thick 3/8" hex shank won’t round out in the drill chuck for a more positive grip. • 12 hole sizes.
Two flutes cut faster and keep bit cooler. • Fast-starting, non-walking drill tip. • High-visibility silver targets for primary hole sizes. • Thick 3/8" hex shank won’t round out in the drill chuck for a more positive grip. • 3 hole sizes.
Bits drill through nails, wood, vinyl, plastics, and heavy timber. • Special bit steel with machine-ground flutes and polished edges for smooth, wobble-free boring. • Deep, open throat design clears chips for faster, cleaner cuts. • Feed-screw pilot draws bit into wood. • Full length is heat-treated and tempered. • Shanks are 7/16" hex to fit 1/2" (13 mm) and larger three-jaw chucks. • Head and twist are ground to correct clearance for easy removal from hole. • For heavy construction and repair work in mines, on docks and bridges as well as electrical work.
Bits drill through nails, wood, vinyl, plastics, and heavy timber. • Special bit steel with machine-ground flutes and polished edges for smooth, wobble-free boring. • Deep, open throat design clears chips for faster, cleaner cuts. • Feed-screw pilot draws bit into wood. • Full length is heat-treated and tempered. • Shanks are 7/16" hex to fit 1/2" (13 mm) and larger three-jaw chucks. • Head and twist are ground to correct clearance for easy removal from hole. • For heavy construction and repair work in mines, on docks and bridges as well as electrical work.

Showing 1–20 of 32 results