| NVST-PHD4008P |
| SYSTEM |
| Video System |
NTSC |
| IP Camera |
8ch PoE |
| Video Output |
VGA/HDMI (upto 1920 × 1080) |
| Audio Input / Output |
IN : 4/8ch (from IP CAM) + 1ch (SET for Two way audio)
OUT : 1ch (SET)
|
| Audio Input Level |
0.5 ~ 1.4 Vp-p @ 20K Ohm |
| Sensor Input / Output |
4 input / 1 relay output |
| External Port |
RS-232 / RS485 |
| USB Port |
2 Ports (Front / Rear) |
| Control |
IR Remote Control, Mouse, Client S/W |
| RECORDING |
| CODEC |
H.264 |
| Throughput(Bit Rate) |
Max. 40 Mbps |
| Maximum Rate & Resolution |
Max. 200 / 240 fps @ 1080P |
| Record Mode |
Manual, Schedule, Event (motion/sensor) |
| Quality |
Super, High, Middle, Low (4levels) |
| Pre/Post Recording |
~5sec / ~300sec |
| Motion Detection |
8 × 8 Grids / 20 Senssitivity Levels |
| PLAYBACK |
| Search Mode |
Calendar, Time, Event, Thumb-nail, Instant Playback |
| Playback Speed |
1× ~ 16× FF/REW, STEP |
| STORAGE |
| HDD Support |
2 internal SATA HDDs (Up to 6TB) |
| External Storage |
e-SATA (1 port) / USB (2 port) |
| Backup device |
USB-DVD±RW / USB flash drive / Network |
| OSD |
| Display Division |
1, 4, 6, 7, 8, 9 |
| Title |
Multi languages / 12 characters |
| Digital Zoom |
2×, 4×, 8× |
| NETWORK |
| CODEC |
H.264 / JPEG |
| Accounts |
1 Admin + 10 Users |
| Client Software |
EMS 2.0 / IE (active-X) / Mac PC / Mobile Phone |
| Remote Notification |
Email message, PUSH Service(Smart Phone) |
| Service |
TCP/IP, SMTP, DHCP, DDNS, UPnP |
| OTHER |
| Firmware Update |
USB Flash Drive / Network |
| Daylight Saving |
YES |
| Power Recovery |
Auto Recovery |
| Log |
Event log / System log |
| Watchdog |
Software / Hardware watchdog |
| Dimension |
38 × 34 × 7 (CM) / 15 × 13 × 2.7 (Inch) |
| Power Source |
12V 5A Adapter |
| 48V 2A Adapter(POE) |
| Operation Environment |
30 ~ 80% RH, 5°C ~ 40°C (41°F ~ 104°F) |
