Access control system using network (LAN)

As communication between fingerprint recognition device and authentication server is done using UTP cable and TCP/IP protocol, existing local area network can be used for good scalability. 10/110 Mbps auto detect provides fast speed and allows easy management and monitoring through a network.

Convenient auto sensing function

Authentication operation requires only fingerprint input without additional key input. Takes a photo at the time of each transaction Stores up to 12,500 images

Simple authentication using fingerprint

The use of fingerprint recognition technology, one of biometrics technologies, prevents loss of password, card, key or theft. As fingerprint is used, the security level of authentication is substantially increased.

Convenient guidance message using LCD and voice

Using voice and LCD display window, every authentication operation is processed with guidance message. Especially, the built-in backlight of LCD display window allows for easy screen identification and key operation even in dark areas. As voice is saved in the memory, making change to a desired voice is possible at the server.

Provides various and flexible access control methods

• Convenient to use while preventing lending, forgery and loss of key or card
• Provides perfect access control function by granting access rights for each user group
• Provides flexibility in access control by granting limited access hour
• Provides low maintenance and development cost compared to other access control devices
• Removes inconvenience of obtaining additional card from management office for visitors

Applied in various operation systems

• Applied in various operation systems such as crime prevention, access, time & attendance and meal service
• Supports various operation systems according to operation method setting of the terminal menu

Sufficient processing capacity of server

In case of managing information of accessed people using the server nearly limitless processing is possible.

Provides various registration and authentication methods

There are 4 registration and authentication methods available for general users. The registration and authentication method must be chosen before registering a user or administrator.

 

KEY FEATURES

• Access Control System Using Network
  
• Convenient Auto Sensing Function
  
• Interphone integration for Visitor Control
• Access Control / Alarm Controller
  
• DVR Integration via RS-485, Wiegand or RS-232
• Flexible fingerprint enrollment and authentication levels
  

SPECIFICATIONS

	DA AC2100RF
CPU	266MHz 32Bit RISC CPU
Template Capacity	200 templates
Log Capacity	5,000 events
Cards Supported	125 KHz proximity card (AC-2100RF) / 13.56 MHz smart card (AC-2100SC) : ISO14443A mifare fingerprint template on card
Operation Mode	Fingerprint, RF/smart card, RF/smart card + fingerprint
LCD Display	128 × 64 graphic display LCD
Communications	RS-485, RS-232, Wiegand In & Out
Fingerprint Sensor	500 DPI optical sensor
Verification(1:1) Time	<0.5 sec
Identification(1:N) Time	<1 sec
FRR / FAR	0.1% / 0.0001%
Supply Voltage	DC 12V ~ 24V
Operation Environment	-4~122˚F (-20 ~50˚C) / Lower than 90% RH (Non-condensing)
Dimension	3.6(W) × 6.7(H) × 1.6(D) inches 92.3(W) X 170(H) X 39.5(D) mm