Platinum Tools T130K1 VDV MapMaster 3.0 Cable Tester Kit

VDV MapMaster 3.0 Main Unit • ID Only Network Remotes, #1-20 • RJ45 Port Saver • No-Fault, RJ12 Cable (2) • FTP Patch Cable, 5 • Cable Assembly, RJ45 to Alligator Clip • BNC Adapter Kit • 9V Battery • Hanging Pouch

SKU: PL-T130K1 Category:

Login for Price


The VDV MapMaster™ 3.0 is designed to test and measure lengths of all common low voltage cabling found in today’s network, video or telephone systems. It also maps the locations of cable ends by sending a tone on the cable that can be traced with a tone tracer or by blinking the LED on the port jack. The VDV MapMaster™ 3.0 has a large, bright back- lit LCD display and glow-in-the-dark buttons to directly access each function. The remote stores inside the main unit for ease of cable testing. The VDV MapMaster™ 3.0 is turned on by pressing the power button and begins operating in the last mode used or the selected mode: twisted pair (DATA), coax (VIDEO), telephone (VOICE), tone generation (TONE) or Port Link-Blink (LINC).


    Cable Verification
    •Test, Measure, and Map data, coaxial video and voice cables
    •Fault testing for opens, shorts, mis-wires, reverses and split pairs
    •Highly accurate length, opens and split detection using capacitive technology
    •Port Link-Blink to visually identify connected ports on a switch or router
    •Verify end-to-end grounding of shielded data cables
    •Single-ended testing for shorts
    •Wiremap testing to EIA T568A/B standards and cross- over cables
    •Loop mode for continuous testing
    •Recognizes up to 20 unique remote ID numbers for mapping cables
    •Built-in 4-cadence Tone Generator for audible tracing of cable runs
    •Auto-off and low power consumption for extended battery life
    •Built-in LED Flashlight
    •Easy-to-read Large Backlit LCD Display
    •Glow-in-the-Dark Buttons
    •Audible Beep for Additional Feedback
    •Ergonomic Slip-resistant Side Grips
    •Self-stored Master Remote – Squeeze remote at finger grip openings in main unit to remove
    •RJ45, RJ12 and F-Jack on Main Unit and Remote


Display Large 2.75" Backlit Monochrome LCD
Dimensions 6.8˝ × 3.2˝ × 1.4˝ (17.3 × 8.1 × 3.5 cm)
Weight 10.8 oz. (305 grams) with battery and remote
Operating Temperature 0˚C/32˚F to 50˚C/122˚F
Storage Temperature −20˚/-4˚F to 60˚C/140˚F
Humidity 10% to 90%, non-condensing
Maximum Voltage between any two connector pins without damage RJ12/RJ45/F: 50V DC or AC
Battery Life 9V alkaline battery typical Standby:  4 years
Active:        425 hours
Cable Types: Shielded or Unshielded; CAT7, CAT6A, CAT5e, CAT5, CAT4, CAT3, Coax
Maximum Cable Length Testing 0 to 1,000 feet (305 meters)
Minimum Cable Length for Split Pair Detection 1.5 feet (0.5 meters)
Maximum Coax
Cable Length
Varies depending on cable resistance.
Download PDF Datasheet[ Click to download ]
Download Generic PDF Datasheet (No SKU number)[ Click to download ]


There are no reviews yet.

Be the first to review “Platinum Tools T130K1 VDV MapMaster 3.0 Cable Tester Kit”